Driveway Sealing Bradford
To transform your driveway - call the professional driveway sealers and restorers
Contact Jimmy's External Cleaning Services for a FREE quote today
INCLUDE YOUR MEASUREMENTS & EVEN A PHOTO FOR A QUICK PROVISIONAL DRIVEWAY SEALING QUOTE
SEND ANYTIME 24/7
driveway sealing enquiry
Driveway Sealing
Pressure cleaning concrete and paved surfaces is an effective way to remove dirt and grime from driveways, patios, or pathways.
It can restore the original appearance of the concrete and make it look new again. However, After pressure washing, it is important to seal the surface of your driveway to prevent water from seeping into cracks and causing damage especially when winter causes this water to freeze and expand - it is this process that leads to potholes on roads.
Sealing brick, stone or cement surfaces can also prevent discoloration from staining the surface.
To revive and protect your driveways simply contact Jimmy's External Cleaning Services today.
Imprinted Concrete Driveway Sealing
Before applying sealer to imprinted concrete after power washing, we ensure that the concrete is completely dry to prevent any moisture issues. It is important to wait for at least twenty-four hours or longer, depending on factors such as humidity levels and the thickness of the concrete before application.
We will need to co-ordinate this with the weather as ideally mid-morning is best to apply the sealer before the sun is directly overhead. We apply the sealer evenly using a medium-nap roller or rubber blade, making sure to cover all pores and gaps in the concrete. Use brushes to carefully seal the edges of the driveway to prevent sealer from spreading to unwanted areas. We then apply a second coat for additional protection, overlapping roller strokes to ensure thorough coverage. As sealants have strong chemicals in them we follow strict protocol to ensure safety during application.
Driveway Sealing near me
If you live in Bradford and are looking to have your driveway sealed then simply call or message us 24/7
Re-sanding Block Paving
Re-sanding block paving comes with numerous benefits and reasons, primarily to enhance the durability and appearance of the paved surface. By re-sanding, the blocks are securely held in place, preventing shifting or sinking over time. This helps to maintain a level and stable surface for walking or driving.
Additionally, re-sanding can also improve the overall aesthetics of your block paving by filling in any gaps, cracks, and preventing weeds reappearing over time. Ultimately, re-sanding block paving can prolong the life of the paved area and provide a fresh and renewed look.
Following re-sanding we would also advise sealing the block paving too. This will provide a hard top surface to both your paving and sand which will inhibit weeds and enhance the colour of your block paving.
Our block paving sealing service is available in both a matt and silk finish and is also available with colour options which can revive faded pavers.
Sealing Driveways
Tarmac Restoration
Over time tarmac driveways will start to loosen and if this is left the problem will get worse and the speed of degradation will increase as the gaps in the tarmac will allow for water and dirt to ingress and further loosen the tarmac and cracks will appear. It will reach a stage where you will be looking to replace or resurface your tarmac driveway and this is likely to be a very costly option.
By utilising our tarmac restoration service we can have your tarmac driveway looking like new at a fraction of the cost. Our process will restore the resins which will be most effective following a gentle pressure clean of the tarmac to remove algae and moss. If there are already small holes and cracks these will be filled and then our special coating will be applied, typically in two coats. The first coat will get into the deeper gaps and then the second coat will smooth off the finish. Once done your driveway will be more waterproof and better equipped to resit fungal and algae growth as well as oil and grease. We can restore black, red and green tarmac surfaces simply get in touch today to arrange a quote.
Frequently asked Restoration & Driveway Sealing Questions
-
What types of driveways do you seal?
Our speciality is imprinted concrete along with block paving and pavestone driveways. We also provide a tarmac restoration service which is the same inprinciple but done differently for tarmac surfaces.
-
Do you power wash before sealing a driveway?
It will depend on the driveway. We will carry out an initial inspection and of the dirveway is suitable for pressure washin then we will take that course of action. If not we can
-
Should I hire a professional for driveway sealing?
If you have the time, energy, and necessary equipment, then you may be able to tackle the job yourself. However, sealing a driveway is messy task that requires specific tools and cleaning solutions. If you are unsure of how to properly apply sealant to your driveway it may end up being a complete waste of your time and money to that the job is done thoroughly and efficiently, then hiring our professional services may be the best option. We have the experience, expertise, and equipment needed to get your driveway looking like new and staying newer looking for longer too.
-
How often should I have my driveway sealed?
ButtonThe frequency at which you should seal your driveway depends on factors such as the weather conditions, usage and the presence of trees or other natural items than can influence the amount of dirt and debris falling onto your driveway, which once driven in can start to degrade your seal. In general, it is recommended to seal your driveway once every 3-5 years.
-
Why should I choose Jimmy's External Cleaning Services to seal my driveway?
We have years of experience cleaning patios and are SmartSeal approved contractors using some of the best driveway sealing products available in the UK.